5787190-5 Datasheet, PDF (22/32 Pages) Tyco Electronics – AMPLIMITE Subminiature D Connectors

AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Performance Specifications and
Technical Documents
Performance Specifications for Mating Cycles (Durability): 500 max.
Right-Angle, Vertical and .050
Centerline Cable Products
Current Rating (30°C T-Rise): 1A max., 50% energized
Termination Resistance (Mated): 25 milliohms max.
Insulation Resistance: 1000 megohms min.
Dielectric Withstanding Voltage: 500 VAC
Header Processing Temperature: +220°C max. for 3 minutes
Temperature Range: –55°C to 105°C
Performance Specifications for
.025 [1.27] Centerline Ribbon
Cable Product. Same as above
except:
Current Rating (30°C T-Rise): 1A max. center four contacts energized (two from top row, two
from bottom row)
Termination Resistance (Mated): 50 milliohms max.
Product Specifications:
108-1228 AMPLIMITE .050 Series Printed Circuit Board Mounted and Cable Applied
108-1359 AMPLIMITE .050 Series .025 [0.64] Centerline Connectors
108-1228 AMPLIMITE .050 Series Stacked Connectors
108-1228-2 AMPLIMITE .050 Series ACTION PIN Connectors
108-1228-3 AMPLIMITE .050 Series SBus Connectors
Application Specifications:
114-40029 AMPLIMITE .050 Series Printed Circuit Board Mounted and Cable Applied
Connectors
114-40049 AMPLIMITE .050 Series .025 [0.64] Centerline Connectors
Instruction Sheets:
408-6923 AMP Manual Arbor Frame Assembly
408-6927 TE Design Recommendations for Printed Circuit Board
Support Fixture
408-9200 AMP Single Wire Insertion Tool
408-9822 Wire Termination Tooling Kit for CHAMPOMATOR 2.5 Machine
408-9820 AMP Cover Closing and Staple Inserter Kits
408-9663 AMP Mass Insertion Tool
408-9750 AMP Cover Lacing Fixture
408-9757 AMP Tooling Assembly for ACTION PIN Receptacles
408-9817 AMP Manual Miniature Applicator Frame Assembly
408-9427 Round-to-Flat Cable Termination
408-9875 AMP Universal Base Tool for .025 [0.64] CL Connectors
408-9892 AMP Tool Kit for .025 [0.64] CL Connectors
Customer Manuals:
409-5839 CHAMPOMATOR 2.5 Machine
409-5791 Control Unit for CHAMPOMATOR 2.5 Machine
Catalog 82068
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches and
millimeters unless otherwise
specified.
USA: [phone]
Canada: [phone]
Mexico/C. Am.: [phone]
Latin/S. Am.: [phone]
Germany: [phone]
27
UK: [phone]
France: [phone]
Netherlands: [phone]
China: [phone]