5787190-5 Datasheet, PDF (19/32 Pages) Tyco Electronics – AMPLIMITE Subminiature D Connectors

AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Panel Mount Plug Assemblies
With Rails, Latch Blocks, Series III (Continued)
.406
[10.31]
Materials:
Housing and Termination Covers—
Thermoplastic, 94V-0 rated, black
Shell—Steel, plated bright nickel over
copper
Bracket—Zinc, plated nickel over
copper
Contacts—Phosphor bronze, duplex
plated .000030 [0.00076] min. gold on
mating end, bright tin in termination
area, all nickel underplated
Recommended wire size—
28 AWG [0.08-0.09mm²] or
30 AWG [0.05mm²], solid or
7 strand, with a .029-.036
[0.74-0.89] insulation diameter or
.050 [1.27] centerline, 28 AWG
[0.08-0.09mm²] stranded, PVC, flat
ribbon cable.
.201^±.002
[5.11^±0.05]
Typ.
.170^±.002
[4.32^±0.05]
Typ.
Technical Documents:
Product Specifications—108-1228
Application Specifications—
114-40029
Note: Extra pin contact protection is provided
by rails, which facilitate a straight-out, unmat-
ing motion. A side-to-side rocking motion
should not be used to disengage the connector
system.
.050
C
[1.27]
Typ.
Cavity Identification
2-56 UNC*
2 Plc.
F ±.004
[±0.05]
E
Mating Face
.596
[15.14]
Typ.
Contact
Typ.
D ±.007
[±0.18]
Housing
Note: Refer to TE Customer drawings and Application Spec for PCB & panel layouts.
No. of
Pos.
20
26
50
50
100
C
1.080
27.43
1.230
31.24
1.830
46.48
1.830
46.48
3.080
78.23
Dimensions
D
E
.879
22.33
1.029
26.14
1.629
41.38
1.629
41.38
2.879
73.13
1.315
33.40
1.465
37.21
2.065
52.45
2.065
52.45
3.315
84.20
F
.915
23.24
1.065
27.05
1.665
42.29
1.665
42.29
2.915
74.04
Part Numbers
Connectors With Assembled
Standard Termination Covers
5-749611-2*
5-749611-1*
5-749611-5*
5-750450-1*
5-749611-9*
*Part Number 750450-1 has 4-40 threaded holes. All others have 2-56 threaded holes.
Note: For termination, cover closing and wire lacing tooling, see page 14.
Note: For termination tooling other than wire lacing see pages 28 & 29.
24
Catalog 82068
Revised 4-12
www.te.com
Note: All part numbers are RoHS compliant.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches and
millimeters unless otherwise
specified.
USA: [phone]
Canada: [phone]
Mexico/C. Am.: [phone]
Latin/S. Am.: [phone]
Germany: [phone]
UK: [phone]
France: [phone]
Netherlands: [phone]
China: [phone]