V23026 Datasheet, PDF (2/10 Pages) Tyco Electronics – P1 Relay

P1 Relay
V23026
1 pole telecom and signal relay, polarized,
Through Hole Type (THT) or
Surface Mount Technology (SMT),
Relay types:
non-latching with 1 coil
latching with 2 coils
latching with 1 coil
Features
– Directly triggerable with TTL standard modules such
as ALS, HCT and ACT
– Slim line 13.5 x 7.85 mm, 0.531 x 0.309 inch
– Switching current 1 A
– 1 changeover contact (1 form C / SPDT)
– Bifurcated contacts
– Immersion cleanable
– High sensitivity results in low nominal power consumption
65 to 130 mW for non-latching
30 to 150 mW for latching
– Surge voltage resistance between contact and coil:
- 2.5 kV (2 / 10 µsec) meets the Bellcore Requirement GR-1089
- 1.5 kV (10 / 160 µsec) meets FCC Part 68
Typical applications
– Automotive equipment
CAN bus, imobilizer
– Office equipment
– Measurement and control equipment
– Medical equipment
– Safety equipment
Options
– FCC version on request. Testing of open contacts with surge
voltage in accordance with FCC 68.302 (1.5 kV, 10/160 µsec)
UL File No. E 111441
Basic insulation coil/contacts according to IEC/EN 60950
Clearance
> 0.75 mm
Creepage distance > 0.75 mm
European Directive conformance:
P1 relay product conformance according to:
- Directive 2000/53/EC: ELV (End of Life of Vehicles)
- Directive 2002/95/EC: ROHS (Restrictions of the
use of certain hazardous substances in electrical and
electronic equipment)
Compliance is evidenced by written declaration from all raw
material suppliers.
Tyco Electronics AXICOM only has responsibility for the proper
processing of these materials.
Confirmation is valid for date codes ≥ 0429
Page 2 (10) 108-98009 Rev. C