MLO80100-01020 Datasheet, PDF (2/2 Pages) Tyco Electronics – Surface Mount Voltage Controlled Oscillator EGSM 1000 - 1040 MHz

Surface Mount Voltage Controlled Oscillator
Absolute Maximum Ratings¹
Parameter
Tuning Voltage (V_T)
Supply Voltage² (V_CC)
Storage Temperature
Solder Assembly Temperature
Absolute Maximum
0 to +15V
+6V
-45°C to +100°C
+230°C for 10 secs
1. Exceeding these limits may cause permanent damage.
2. A series resistor will allow operation at any greater supply voltage.
Used in conjunction with a bypass capacitor this will yield
improved power supply decoupling and noise suppression.
3. Static sensitive, observe appropriate precautions.
Environmental Specifications
Devices are designed to operate over the temperature range
of -20°C to +70°C and after exposure to the shock
vibration, thermal shock and moisture conditions typically
encountered in base station and subscriber terminal
environments.
MLO80100-01020
V2.00
Functional Configuration
Pad
1
2
3
4
Case / Lid
Substrate Material FR4.
Configuration
RF Output
V_CC
V_T
N/C or Ground
Ground
Typical Performance @ +25°C and V_CC +5V
PHASE NOISE
-40
-60
-80
-100
-120
-140
-160
-180
100
1K
10K
100K
1M
10M
FREQUENCY OFFSET FROM CARRIER (Hz)
OUTPUT POWER
3.0
2.0
1.0
0.0
-1.0
-2.0
-3.0
.99
1.00
1.01
1.02
1.03
1.04
1.05
FREQUENCY (GHz)
TUNING CURVE
1.06
1.04
1.02
1.00
0.98
0.0
1.0
2.0
3.0
4.0
5.0
TUNING VOLTAGE (V)
TUNING SENSITIVITY
25.0
20.0
15.0
10.0
5.0
0.0
1.0
2.0
3.0
4.0
5.0
TUNING VOLTAGE (V)
Specifications Subject to Change Without Notice.
2
North America: Tel. [phone]
Fax [phone]
s Asia/Pacific: Tel. [phone]
Fax [phone]
M/A-COM Ltd.
s Europe: Tel. [phone]
Fax [phone]