MA4SW510 Datasheet, PDF (2/5 Pages) Tyco Electronics – SP5T PIN Diode Reflective Switch

SP5T PIN Diode Reflective Switch
MA4SW510
V 2.00
Electrical Specifications @ T_A = 25 °C, +/- 20 mA Bias Current
(On-Wafer Measurements)
Parameters
Insertion Loss
Isolation
Input Return Loss
Output Return Loss
Switching Speed¹
Frequency
20 GHz
20 GHz
20 GHz
20 GHz
10 GHz
Minimum
-
28
-
-
-
Typical
0.9
38
22
23
50
Maximum
1.4
-
-
-
-
Units
dB
dB
dB
dB
nS
1. Typical switching speed is measured from 10% to 90% of the detected RF voltage driven by a TTL compatible driver. Driver
output parallel RC network uses a capacitor between 390 pF - 560 pF and a resistor between 150 - 220 Ohms to achieve
50 ns rise and fall times.
Typical Driver Connections
Control Level (DC Current)
J2
J3
J4
J5
J6
-20 mA +20 mA +20 mA +20 mA +20 mA
J2-J1
Low Loss
+20 mA -20 mA +20 mA +20 mA +20 mA Isolation
+20 mA +20 mA -20 mA +20 mA +20 mA
+20 mA +20 mA +20 mA -20 mA -20 mA
+20 mA +20 mA +20 mA +20 mA -20 mA
Isolation
Isolation
Isolation
Condition of RF Output
J3-J1
J4-J1
J5-J1
Isolation
Isolation
Isolation
Low Loss
Isolation
Isolation
Isolation
Isolation
Low Loss
Isolation
Isolation
Isolation
Isolation
Low Loss
Isolation
J6-J1
Isolation
Isolation
Isolation
Isolation
Low Loss
Note: Typical Switching Speed measured from 10 % to 90 % of detected RF signal driven by a TTL compatible driver.
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s)
or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
2
n North America: Tel. [phone]
n Asia/Pacific: Tel.[phone], Fax [phone]
n Europe: Tel. [phone], Fax[phone]