MA4SW410 Datasheet, PDF (2/6 Pages) Tyco Electronics – SP4T Monolithic PIN Diode Switch

SP4T PIN Diode Switch
MA4SW410
V 1.00
Electrical Specifications @ T_A = + 25 °C, +/- 20 mA Bias Current
(On-Wafer Measurements)
Parameters
Insertion Loss
Frequency
20 GHz
Minimum
Nominal
0.9
Maximum
1.3
Units
dB
Isolation
20 GHz
28
34
dB
Input Return Loss
20 GHz
15
dB
Output Return Loss
20 GHz
15
dB
Switching Speed¹
10 GHz
50
nS
1. Typical Switching Speed is measured from 10 % to 90 % of Detected RF Voltage driven by a TTL compatible driver. Driver
Output Parallel RC Network uses a Capacitor between 390 – 560 pF and a Resistor between 150 – 220 Ohms to achieve
50 nS Rise and Fall Times.
Typical Driver Connections
Control Level (DC Current) at Port
J2
-20 mA
J3
+20 mA
J4
+20 mA
J5
+20 mA
Condition of
RF Output
J1-J2
Low Loss
Condition of
RF Output
J1-J3
Isolation
Condition of
RF Output
J1-J4
Isolation
Condition of
RF Output
J1-J5
Isolation
+20 mA -20 mA
+20 mA +20 mA
+20 mA
-20 mA
+20 mA
+20 mA
Isolation
Isolation
Low Loss
Isolation
Isolation
Low Loss
Isolation
Isolation
+20 mA +20 mA
+20 mA
-20 mA
Isolation
Isolation
Isolation
Low Loss
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s)
or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
2
n North America: Tel. [phone]
n Asia/Pacific: Tel.[phone], Fax [phone]
n Europe: Tel. [phone], Fax[phone]