MA4AGSW1A Datasheet, PDF (2/15 Pages) Tyco Electronics – AlGaAs SPST Non-Reflective PIN Diode Switch

AlGaAs SPST Non-Reflective PIN Diode Switch
Electrical Specifications @ 25 ° C (On Wafer Measurements )
MA4AGSW1A
Rev 2.0
Frequency Range = 10 – 50 GHz
Parameter
Ports
Bias Conditions Specification Comments
Insertion Loss
Input Return Loss
Output Return Loss
( Insertion Loss )
Output Return Loss
( Isolation )
Isolation
Switching Speed
( 10 % - 90 % RF
Voltage )
J1 – J2
J1
( Terminate J2
into 50Ω )
J2
(Terminate J1
into 50Ω )
J2
J1 – J2
J1 – J2
D.C. Bias 1 =
-1.35 V @ -10 mA
D.C. Bias B =
-1.35 V @ 0 mA
D.C. Bias 1 =
-1.35 V @ -10 mA
D.C. Bias B =
-1.35 V @ 0 mA
D.C. Bias 1 =
-1.35 V @ -10 mA
D.C. Bias B =
-1.35 V @ 0 mA
D.C. Bias 1 =
+1.35 V @ +10 mA
D.C. Bias B =
+1.35 V @ +10 mA
D.C. Bias 1 =
+1.35 V @ +10 mA
D.C. Bias B =
+1.35 V @ +10 mA
+/- 5V PIN Diode TTL
Driver @ 1 MHz Rep
Rate
1.2 dB
Typical
15 dB
Typical
18 dB
Typical
18 dB
Typical
30 dB
Typical
10 nS
Typical
Value at 50 GHz
Value at 50 GHz
In Insertion Loss
State
Value at 50 GHz
In Insertion Loss
State
Value at 50 GHz
In Isolation State
Value at 50 GHz
Value at 10 GHz
Notes:
1. “ D.C. Bias 1” and “ D.C. Bias B ” Nodes can be connected together.
Error!
2