MA4AGSW1 Datasheet, PDF (2/6 Pages) Tyco Electronics – AlGaAs SPST Reflective PIN Diode Switch

AlGaAs SP4T PIN Diode Switch
Electrical Specifications @ T_A = 25 °C, - 5 V @ 0 mA,
or +10 mA Bias Current (On-Wafer Measurements)
MA4AGSW1
V 1.00
Parameters
Insertion Loss
Isolation
Input Return Loss
Output Return Loss
Switching Speed
RF Specifications
Frequency Minimum
0.05 - 18 GHz
-
18 - 50 GHz
0.05 - 18 GHz
20
18 - 50 GHz
40
0.05 - 18 GHz
-
18 - 50 GHz
0.05 - 18 GHz
-
18 - 50 GHz
10 GHz
-
Typical
0.2
0.3
22
46
30
16
30
16
10
Maximum
0.3
0.6
-
-
-
-
Units
dB
dB
dB
dB
ns
NOTES:
1. Typical switching speed is measured from 10% to 90% of the detected RF voltage driven by a TTL compatible driver. Driver
output parallel RC network uses a capacitor between 390 pF - 560 pF and a resistor between 150 - 220 Ohms to achieve
20 ns rise and fall times.
Typical Driver Connections
Control Level (DC Current)
J1 or J2
-5 V
RF Output Conditions
J1-J2
Low Loss
+10 mA
Isolation
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s)
or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
2
n North America: Tel. [phone]
n Asia/Pacific: Tel.[phone], Fax [phone]
n Europe: Tel. [phone], Fax[phone]