98-3100 Datasheet, PDF (2/2 Pages) Tyco Electronics – Definite Purpose Contactor 3-pole, 20-40 FLA AC Coil

Ordering Information
B Typical Part No.
Catalog 1308242
Issued 3-03 (PDF Rev. 3-04)
3100 -
30 Q
1. Series:
3100 = 3-pole, 20-40 FLA contactor
2. Packaging:
Y = Individual Pack
- = Bulk Pack
A-ZZZ = Customer specific information (assigned by factory)
3.Pole Configuration:
30 = 3 Form X (3PST-NO-DM)
4.Coil Voltage (50/60 Hz.):
Q = 24VAC U = 208/240VAC
T = 120VAC V = 277VAC
H = 480VAC
I = 24VAC, molded
J = 120VAC, molded
K = 208/240VAC, molded
M = 277VAC, molded
W = 480VAC, molded
5.Contact Ratings (Inductive):
7 = 20 FLA
8 = 25 FLA
9 = 30 FLA
10 = 40 FLA
6.Customer ID Suffix:
999 = Standard Model
000-998 = Factory assigned customer ID
7. Option Code:
Leave Blank = No customer-specific options
A - ZZ = Factory assigned customer-specific options.
Standard part numbers listed below are more likely to be available from stock.
3100-30Q9999CY
3100-30T9999CY
3100-30U9999CY 3100-30T10999CG
3100-30Q10999CG 3100-30U10999CG
PRODUCTS UNLIMITED
9 999
Outline Dimensions
3.00
(76.2)
2.97
1.78 ^(75.44) 1.19
(45.21)
(30.23)
3.39
(86.1)
2.0 MAX.
(50.8)
Shown with Optional Auxiliary Switches
Auxiliary Switches
.250 TYP.
(6.35)
2.00
(50.8)
.203 TYP.
(5.156)
.455 DIA.
(11.56)
3.25
(82.55)
3.75
(95.25)
.203 TYP.
.125
(5.156)
(3.175)
2.375 TYP.
(60.325)
Termination Options
.253
(6.43)
Standard on
Special on
20, 25, 30, 35 FLA 20, 25, 30, 35 FLA
#10-32 Combination #10-32 Sems
Phillips, Slotted &
Screw
5/16 Hex Head
with Pressure
#12 Washer
Plate
Standard
on 40 FLA
Lug accepts 14-4
Cu/Al AWG
ORDERING NOTE: “Standard” terminals need not be specified
in the “Ordering Information” chart above. “Special” terminals
are offered on a special order basis. Special order items may be
subject to extended leadtimes and significant minimum order
quantities. Your Tyco Electronics sales engineer must consult
with the factory before providing price and availability
information regarding items with these options.
Various interlock / auxiliary switches are available for the Model 98 contactor.
All auxiliary switches for the Model 98 are snap-on design, no tools required.
ONE SPDT
SWITCH
PER SIDE
TWO SPDT
SWITCHES
PER SIDE
1 N/O / 1 N/C
Equipped with 0.250” (6.35) Quick Connect Terminals
Factory Modifications
Description
Contact Config.
NO NC
Single unit interlock
1
0
configurations listed.
0
1
Maximum of two.
1
1
(One on each side.)
2
0
0
2
See footnote (1) for ratings. 2
2
SPDT Circuit
1
1
(Either one or two
2
2
switches per side.)
2
2
See footnote (2) for ratings. 4
4
SPDT Dry Circuit
1
1
0.1 amp max.
2
2
Gold Flashed Contacts
4
4
Field Added Kits
Kit Catalog
Number of
Number
Kits Required
98220-303
1
98220-331
1
98220-332
1
98220-303
2
98220-331
2
98220-332
2
98220-337
1
98220-338
1
98220-337
2
98220-338
2
98220-341
1
98220-340
1
98220-340
2
Footnotes: Ratings of Auxiliary Interlocks / Switches
(1) Contact Rating Single Circuit NO or NC and two circuit NO/NC:
120V 240V 480V 600V
Amperes - Break
3.0 1.5 0.75 0.6
Amperes - Make
30 15 7.5
6
Amperes - Continuous 10 10 10 10
(2) Contact Rating SPDT (337):
10A, 1/3 HP, 125 or 250 VAC
1/2A, 125 VDC; 1/4A, 250 VDC:
4A 120 VAC on Lamp Load
Equipped with #6-32 Screw Terminals & Saddle Clamps
Factory Modifications
Description
Contact Config.
NO NC
Single unit interlock
1
0
configurations listed.
0
1
Maximum of two.
1
1
(One on each side.)
2
0
0
2
See footnote (1) for ratings. 2
2
Field Added Kits
Kit Catalog
Number of
Number
Kits Required
98220-303
1
98220-331
1
98220-332
1
98220-303
2
98220-331
2
98220-332
2
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
833
Refer to inside back cover.