408-7384 Datasheet, PDF (2/2 Pages) Tyco Electronics – Reasons for reissue of this instruction sheet are provided in Section 6, REVISION SUMMARY.

408-7384
Tool Fully Inserted
into Connector
Radius Between
Tool Blades
Visible
Figure 3
CAUTION
Excessive or improper force may cause damage
to the contacts or cable.
!
4. After the cable and all of the contacts have
been completely extracted, remove the tool from
the connector.
4. MAINTENANCE AND INSPECTION
To ensure proper operation, the tool should conform
to the dimensions provided in Figure 4.
It is recommended that the tool be inspected
immediately when received and at regularly
scheduled intervals.
It is recommended that the tool be stored in a clean,
dry place and cleaned with a soft, lint-free cloth.
5. REPLACEMENT AND REPAIR
The tool is not repairable and should be replaced
when worn or damaged. Additional tools can be
purchased from:
CUSTOMER SERVICE (038-035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105-3608
6. REVISION SUMMARY
Revisions to this instruction sheet include:
• Updated instruction sheet to corporate
requirements
• Removed obsolete extraction tools
• Replaced connector series part numbers with
reference part number
2.54 [1.00]
B
A
0.76 [.030]
6.73
[.265]
0.38 [.015]
32.51
[1.280]
Tool Number
Marked Here
PART NUMBER
0-91047-1
0-91047-2
0-91047-3
0-91047-5
1-91047-0
1-91047-2
EXTRACTION TOOL
DIMENSION
A
B
PART NUMBER
20.32 [.800]
45.72 [1.800]
21.08 [.830]
46.48 [1.830]
1-91047-4
1-91047-5
71.12 [2.800]
48.26 [1.900]
71.88 [2.830]
49.02 [1.930]
1-91047-6
1-91047-8
22.86 [.900]
23.62 [.930]
1-91047-9
86.36 [3.400]
87.12 [3.430]
2-91047-6
Figure 4
2.29 [.09]
DIMENSION
A
B
27.94 [1.100]
33.02 [1.300]
35.56 [1.400]
10.16 [.400]
5.08 [.200]
17.78 [.700]
28.70 [1.130]
33.78 [1.330]
36.32 [1.430]
10.92 [.430]
5.84 [.230]
18.54 [.730]
Rev A
2 of 2