408-4260 Datasheet, PDF (2/7 Pages) Tyco Electronics – Mass Termination Assembly

MTA 58575- 1 and 58576- 1
408- 4260
Read this manual thoroughly before operating any of the pneumatic tools. The performance of these tools will
depend largely upon the intelligent use of information contained in this manual and pay particular attention to
DANGER, CAUTION, NOTE, and SAFETY statements.
DANGER ^{Denotes an imminent hazard which may result in moderate or severe injury.}
CAUTION
!
Denotes a condition which may result in product or equipment damage.
NOTE
i
Highlights special or important information.
Read and understand the entire manual before using the tool.
Always wear appropriate eye protection when using the tool.
Always disconnect the air and lockout the tool when not in use, when performing maintenance on the tool,
or when clearing a jammed tool.
Pinch point warning: Keep hands clear of moving parts during operation.
NOTE
i
Measurements are in metric units [followed by U.S. customary units in brackets]. Illustrations are for identification only
and are not drawn to scale.
DANGER ^{This unit should only be operated by trained personnel.}
DANGER ^{If not using quick- disconnect fittings to connect the tool to the air supply, provide operators other means to easily}
disconnect the tool from the air supply.
DANGER ^{This tool is not insulated for coming into contact with electric power sources.}
2 of 7
Tyco Electronics Corporation
Rev D