4-1437284-3 Datasheet, PDF (19/28 Pages) Tyco Electronics – AMP SUPERSEAL Connectors

2-Inhalt SUPERSEAL 1.0.qxd 09.06.2008 16:14 Uhr Seite 17
AMP SUPERSEAL Connectors 1.0 mm System
for the Automotive Market
Introduction
Catalog 1308072-2
Revised 6-2008
Designed for the automotive
industry, AMP SUPERSEAL
connectors meet the sealing
requirements outlined in
IEC 529 and DIN 40050
I.P 6.7 specifications.
The cap and plug connector
housings incorporate pre-
assembled secondary locks
to help insure correct and
complete contact insertion
into the housing and helps
prevent the contacts from
backing out during mating.
The secondary lock cannot
be closed if the contacts are
not correctly inserted into the
connector housing.
Cavity plugs are available for
sealing unused connector
cavities.
The double spring contact
design (main spring and
auxiliary anti-overstress spring)
insure low insertion and high
contact forces.
Advantages
I Compact system minimizes
packaging requirements
I Sealing reliability proven
under harsh conditions
I Designed for ease of manual
harness assembly, engine
mounting and under hood
environments
Applications
I Wire-to-Board (1.0 mm)
and ECU applications, under
hood or any location where
sealing is required
I Suitable for automotive,
truck, bus, or off-road
vehicles
All specifications subject to change. Consult Tyco Electronics for latest specifications.
17