VF7-41F11 Datasheet, PDF (174/252 Pages) Tyco Electronics – Automotive Relays and Switching Modules

PCB Relays
Twin Relays
Double Micro Relay K (THT – THR)
Catalog 1308028-2
Revised 3-2008
Environmental Conditions
Temperature range, storage
Test
Cold storage
Dry heat
Climatic cycling with condensation
THT
Thermal change
Thermal shock
Damp heat
cyclic
constant
Corrosive gas
THT
THR
Vibration resistance
Shock resistance
Solderability
THT
THR
Resistance to soldering heat
THT
THR
Sealing
THT
THR
Refer to Storage in the “Glossary” catalog page 23 or http://relays.tycoelectronics.com/appnotes/
Relevant standard
Testing as per
Dimension
Comments
IEC 68-2-1
1000 h
–40°C
IEC 68-2-2
Ba
1000 h
125°C
EN ISO 6988
20 cycles
Storage 8/16 h
IEC 68-2-14
Nb
35 cycles
–40/+125°C
IEC 68-2-14
Na
100 cycles
–40/+125°C
Dwell time 1 h
IEC 68-2-30
IEC 68-2-3
Db, Variant 2
Method Ca
6 cycles
56 days
25°C/55°C/93%
40 °C/ 93%
IEC 68-2-42
IEC 68-2-43
IEC 68-2-6 (sine pulse form)
IEC 68-2-27 (half sine form single pulses)
IEC 68-2-20
IEC 68-2-58
IEC 68-2-20
IEC 68-2-58
Ta, Method 1
Tb, Method 1A
10 days
10 days
10 - 500 Hz
6g
6 ms
up to 30 g
Hot dip 5 s
215°C
245°C
Hot dip 10 s
260°C
260°C
No change in the
switching state > 10 μs
No change in the
switching state > 10 μs
Aging 3 (4 h/155°C)
for leaded process (Tm = 183°C)
for Pb-free process (Tm = 217°C)
with thermal screen
Preheating min 130°C
IEC 68-2-17
Qc, Method 2
1 min/70°C
Open vent hole
Ordering Information
Part Numbers
(see table below for coil data)
Relay Description
Part Number
V23086-C2001-A403
0-1413009-9
V23086-C2002-A403
8-1419137-4
V23086-R2801-A403
6-1414920-1
V23086-R2802-A403
6-1414920-2
Contact
Arrangement
2 Form C
2 Form C
2 Form C
2 Form C
Contact
Material
Silver based
Silver based
Silver based
Silver based
Enclosure
Sealed
Sealed
Open vent hole
Open vent hole
Soldering
Technology
THT
THT
THR
THR
Coil Versions
Coil Data
for
DMK – THT/THR
V23086-**001-****
V23086-**002-****
Rated Coil
Voltage
(V)
12
10
Coil Resistance
±10%
(Ω)
254
181
1) _{Allowable overdrive is stated with no load applied and minimum coil resistance.}
Must
Operate Voltage
(V)
6.9
5.7
Must
Release Voltage
(V)
1.5
1.25
Allowable Overdrive ¹⁾
Voltage (V)
at 23°C
at 105°C
27
18
22
15
Standard Delivery Packs (orders in multiples of delivery pack)
DMK – THT/THR:
990 pieces
172
All specifications subject to change. Consult Tyco Electronics for latest specifications.