5-104655-6 Datasheet, PDF (12/13 Pages) Tyco Electronics – Fine Pitch SMT Stacking Connectors

Fine Pitch SMT Stacking Connectors
(Parallel Board-to-Board)
Application Tooling for Cable Connectors
The Tyco Electronics Manual
Miniature Application
Frame Assembly 91295-1,
equipped with a Cover
Closing Kit 543518-1, is
used for the IDC termina-
tion of ribbon cable to the
cable connectors shown on
page 97.
Prior to termination, the
covers must be partially
assembled onto a
connector housing, the
cable inserted between the
covers and contacts and
the covers preclosed by
hand, clamping the cable
in place.
In the Manual Miniature
Application Frame
Assembly, the covers are
fully seated to complete
the mass termination and
provide strain relief for the
completed connection.
Manual Miniature Application Frame Assembly 91295-1
with Cover Closing Kit 543518-1
For tooling information, call
Technical Support at the
numbers listed below.
Note: Refer to Tyco Electronics
Instruction Sheets 408-9817
(Frame Assembly 91295-1) and
408-9909 (Cover Closing Kit
543518-1) for complete
termination/tooling information.
Catalog 889092
Revised 9-06
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
99
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967