MDS-169 Datasheet, PDF (1/4 Pages) Tyco Electronics – Termination Insensitive Mixer, 1 MHz - 3.5 GHz

Termination Insensitive Mixer,
1 MHz - 3.5 GHz
V 3.00
Features
n Intermodulation Ratio is Insensitive to Port Mismatches
n VSWR: <2.0:1 Typical Midband
n Isolation: 35 dB Typical Midband
n Impedance: 50 Ohms Nominal
n Maximum Input Power: 350 mW Max @ 25°C, Derated
to 85°C @ 3.2 mW/°C
n LO Power: +24 dBm Max.
n MIL-STD-883 Screening Available
Description
The unique design of the termination insensitive mixer
(TIM) enables it to apply high reverse voltage to diodes
during their “off” phase, in the LO cycle. This allows for
higher power level performance with minimum distortion.
In addition the TIM has internal loads that provide a good
match and also absorb mixer generated LO frequency
terms. Combined, these features give the mixer its
insensitivity to external mismatches, plus superior VSWR.
FP-2 (MD-169)
C-7 (MDC-169)
SF-1 (MDS-169)