English
Language : 

MA4SPS402 Datasheet, PDF (1/3 Pages) Tyco Electronics – Surface Mount Monolithic PIN Diode Chip
MA4SPS402 SurMount™ Series
Surface Mount Monolithic
PIN Diode Chip
Features
• Surface Mount Diode
• No Wirebonds Required
• Rugged Silicon-Glass Construction
• Silicon Nitride Passivation
• Polymer Scratch Protection
• Low Parasitic Capacitance and Inductance
• High Power Handling (Efficient Heatsinking)
Description
M/A-COM’s MA4SPS402 is a silicon-glass PIN diode
fabricated with M/A-COM’s patented HMIC™ process. This
device features two silicon pedestals embedded in a low loss
glass. The diode is formed on the top of one pedestal and
connections to the backside of the device are facilitated by
making the pedestal side walls conductive. Selective backside
metalization is applied producing a surface mount device. The
topside is fully encapsulated with silicon nitride and has an
additional polymer layer for scratch protection. These
protective coatings prevent damage to the junction and the
anode air-bridge during handling and assembly.
Applications
These devices can be used in series and shunt switches up to 20
GHz where smaller area and profile are required. Low parasitic
values of L and C make additional circuit tuning unnecessary.
These diodes can also be used for switched pad attenuator
circuits.
Absolute Maximum Ratings1
@ TA = +25°C (unless otherwise specified)
Parameter
Reverse Voltage
Forward Current
Operating Temperature
Storage Temperature
Mounting Temperature
Absolute Maximum
-70 V
100 mA
-65°C to +150°C
-65°C to +150°C
+235°C for 10 seconds
1. Exceeding these limits may cause permanent damage.
Case Style
ODS-12531, 2
A
D
E
B
HSP109
C
D
D
1. Backside metal: 0.1 micron thk. gold.
2. Hatched areas indicate bond pads.
DIM.
A
B
C
D
E
INCHES
MIN.
MAX.
0.0465
0.0528
0.0173
0.0236
0.0040
0.0080
0.0150
0.0170
0.0140
0.0160
MILLIMETERS
MIN.
MAX.
1.180
1.340
0.440
0.600
0.102
0.203
0.381
0.432
0.355
0.406
Specifications subject to change without notice.
n North America: Tel. (800) 366-2266, Fax (800) 618-8883
n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298
n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
Visit www.macom.com for additional data sheets and product information.
V 2.0
1