English
Language : 

MA4AGP907 Datasheet, PDF (1/5 Pages) Tyco Electronics – AlGaAs Flip-Chip PIN Diode
AlGaAs Flip-Chip PIN Diode
Features
• Low Series Resistance, 3 Ω
• Ultra Low Capacitance, 25 fF
• High Switching Cutoff Frequency, 40 GHz
• 2 Nanosecond Switching Speed
• Can be Driven by Buffered TTL
• Silicon Nitride Passivation
• Polyamide Scratch Protection
Description and Applications
M/A-COM's MA4AGP907 is an Aluminum Gallium
Arsenide Flip-Chip PIN diode. These devices are
fabricated on OMCVD epitaxial wafers using a
process designed for high device uniformity and
extremely low parasitics. The diodes exhibit an
extremely low RC Product, ( 0.1 ps ) and 2 nS
switching characteristics. The useable frequency
range is 100 MHz to 40 GHz.
They are fully passivated with silicon nitride and
have an additional layer of a polymer for scratch
protection. The protective coatings prevent damage
to the junction and the anode airbridge during handling.
The 25 fF capacitance of the MA4AGP907 is
useable for mmwave switch and switched phase
shifter applications. This diode is designed for use in
pulsed or CW applications, where single digit nS
switching speed is required. For surface mount
assembly, the low capacitance of the MA4AGP907
makes it ideal for use in microwave multithrow
switch assemblies, where the series capacitance of
each “off” port adversely loads the input and affects
VSWR.
MA4AGP907
V1
Package Outline
(Top View Shown Is With Diode
Junction Up)
Cathode
Absolute Maximum Ratings @ 25 °C1
Parameter
Operating Temperature
Storage Temperature
JunctionTemperature
Dissipated RF & DC Power
RF C.W. Incident Power
Mounting Temperature
Maximum Rating
-65 °C to +125 °C
-65 °C to +150 °C
+175 °C
50 mW
+ 23 dBm C. W.
+300 °C for 10 sec.
1. Operation of this device above any one of these parameters
may cause permanent damage.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.