408-8810 Datasheet, PDF (1/3 Pages) Tyco Electronics – Read and understand these instructions before using the seating tool.

Seating Tools 91377-1 and 91378-1
For Z-PACK* Hard Metric (HM)-Zd
Right-Angle Header Assembly Connectors
Instruction Sheet
408-8810
09 JUL 07 Rev B
Seating Tool
Bottom View
Tool 91377-1
Tool 91378-1
Z-PACK HM-Zd 4-Pair
Right-Angle Header Assembly
Connector (Ref)
Printed Circuit (PC)
Board (Ref)
Eye-of-Needle
Compliant Pin
Contact
PC Board Support Fixture
(Customer Supplied)
Figure 1
TOOL
91377-1
91378-1
CONNECTOR SIZE
2-Pair
4-Pair
1. INTRODUCTION
Seating Tools 91377–1 and 91378–1 (shown in
Figure 1) are designed to seat a Z–PACK HM–Zd
right–angle header assembly connector onto a printed
circuit (pc) board. These connectors have
eye–of–needle compliant pin contacts which allows
for solderless installation.
Read and understand these instructions before using
the seating tool.
NOTE
i
Dimensions in this instruction sheet are in metric
units [with U.S. customary units in brackets].
Figures are not drawn to scale.
Reasons for reissue of this instruction sheet are
provided in Section 8, REVISION SUMMARY.
2. DESCRIPTION
Each seating tool is one piece. During seating, the
tool provides a surface to accept the force applied by
the application tool to seat the connector onto the pc
board.
3. REQUIREMENTS
3.1. PC Board Support Fixture (Customer Supplied)
A pc board support must be used to provide proper
support for the pc board and to protect the pc board
and connector from damage. The board support
fixture must be designed for specific needs using the
following recommendations:
S it should be at least 25.4 mm [1 in.] wider than
the pc board
E2007 Tyco Electronics Corporation, Harrisburg, PA
TOOLING ASSISTANCE CENTER 1-800-722-1111
All International Rights Reserved
PRODUCT INFORMATION 1-800-522-6752
TE logo and Tyco Electronics are trademarks.
*Trademark. Other products, logos, and company names used are the property of their respective owners.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
1 of 3
LOC B