English
Language : 

MAALSS0048_15 Datasheet, PDF (6/8 Pages) M/A-COM Technology Solutions, Inc. – Low Noise Amplifier
MAALSS0048
Low Noise Amplifier
1400 - 2000 MHz
Data for 1400 - 1520 MHz Operation
Functional Schematic
VDD
L2
C2
RF
Input
C1
L3
1
L1
6
3
2,4
5
RF
Output
R1
C3
(See note 11)
Recommended PCB Configuration
Layout View
Rev. V2
External Circuitry Parts List 10
Part
C1
C2
L1
L2
L3
R1
C3
Value
47 pF
470 pF
10 nH
3.9 nH
22 nH
See note 11
470 pF
Purpose
DC Block
By-Pass
Tuning
Tuning
RF Choke
Current control
By-Pass
10. All external circuitry parts are readily available, low cost
surface mount components (.060 in. x .030 in. or .080 in.
x .050 in.)
11. Pin 5 allows use of an external resistor to ground for
optional, higher current.
For IDD ~ 5 mA, R1 = 150 Ω;
IDD ~ 6.5 mA, R1 = 120 Ω;
IDD ~ 20 mA, R1 = 27 Ω.
Cross Section View
Pin 1
The PCB dielectric between RF traces and RF ground layers
should be chosen to reduce RF discontinuities between 50 Ohm
lines and package pins. M/A-COM recommends an FR-4 di-
electric thickness of 0.008” (0.20 mm) yielding a 50 Ohm line
width of 0.015” (0.38 mm). The recommended RF metalization
thickness is 1 ounce copper.
6
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.