MAAM-007805 Datasheet, PDF (5/5 Pages) Tyco Electronics – Broadband CATV Single Ended 2-Way Active Splitter 50 - 1100 MHz

MAAM-007805
Broadband CATV Single Ended 2-Way Active Splitter
50 - 1100 MHz
Lead-Free 3 mm 12-Lead PQFN^†
Rev. V2
† _{Reference Application Note S2083 for lead-free solder reflow recommendations.}
Meets JEDEC moisture sensitivity level1 requirements.
Plating is 100% matte tin over copper.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices. An external protection circuit using an
anti-parallel diode pair can be used to protect
the IC.
Please reference application note AN3028 on
http://www.macomtech.com for further detail
5
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.