MAAM-007805 Datasheet, PDF (2/5 Pages) Tyco Electronics – Broadband CATV Single Ended 2-Way Active Splitter 50 - 1100 MHz

MAAM-007805
Broadband CATV Single Ended 2-Way Active Splitter
50 - 1100 MHz
Rev. V2
Electrical Specifications: F = 50 - 1000 MHz, T_A = 25°C, V_DD = +5 Volts, Z₀ = 75 Ω
Parameter
Test Conditions
Units Min. Typ.
Gain
In to Out1, In to Out2
dB
7.3
8.5
Gain Flatness
In to Out1, In to Out2
dB
— 0.75
Noise Figure
In to Out1, In to Out2
dB
—
4.0
Input Return Loss
Input
dB
—
19
Output Return Loss
Output
dB
—
18
Composite Triple Beat, CTB
132 channels, +15 dBmV/channel at the input.
dBc
—
-75
Composite Second Order, CSO
132 channels, +15 dBmV/channel at the input.
dBc
—
-60
Crossmodulation, XMOD
132 channels, +15 dBmV/channel at the input.
dBc
—
-60
Reverse Isolation
Out1 to In, Out2 to In
dB
—
20
Output to Output Isolation
Out1 to Out2
dB
—
25
P1dB
400 MHz
dBm —
17
OIP3
Two tones at 1 MHz spacing, Pin at –10 dBm per tone
400 MHz
dBm
—
33
Max.
9.5
1.2
4.5
—
—
—
—
—
—
—
—
—
OIP2
I_DD
Two tones at 1 MHz spacing, Pin at –10 dBm per tone
400 MHz
dBm
—
V_DD = + 5 Volts
mA
—
55
—
100 120
Absolute Maximum Ratings ^4,5,6,7
Parameter
Absolute Maximum
Max Input Power
+8 dBm
Vbias
+10.0 V
Operating Temperature
Junction Temperature ⁷
-40°C to +85°C
+150°C
Storage Temperature
-65°C to +150°C
4. Exceeding any one or combination of these limits may cause
permanent damage to this device.
5. M/A-COM Technology Solutions does not recommend
sustained operation near these survivability limits.
6. These operating conditions will ensure MTTF > 1 x 10⁶ hours.
7. Junction Temperature (T_J) = T_A + Ó¨jc * (V * I)
Typical thermal resistance (Өjc) = 85 °C/W.
a) For T_C = 25°C,
T_J = 68 °C @ 5.0 V, 100 mA
b) For T_C = 85°C,
T_J = 123 °C @ 5.0 V, 90 mA
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.