M02069_17 Datasheet, PDF (5/45 Pages) M/A-COM Technology Solutions, Inc. – 3.3 or 5 Volt VCSEL/FP Laser Driver IC for Applications to 4.3 Gbps

M02069-12
3.3 or 5 Volt VCSEL/FP Laser Driver IC for Applications to 4.3 Gbps
Rev V2
Table 1-3. DC Characteristics
Symbol
Parameter
Conditions
Min.
I_MD
Monitor diode current Adjusted with R_APCSET
10
adjustment range
Ratio of TxPwr_MON current to
monitor photodiode current
C_{MD_MAX}
Maximum monitor photodiode
capacitance for APC loop
stability. Includes all associated
parasitic capacitances.
TTL/CMOS input high voltage
2.0
(DIS)
TTL/CMOS input low voltage
–
(DIS)
CMOS input high voltage
(VCC3_SEL)
CMOS input low voltage
(VCC3_SEL)
Logic output high voltage (FAIL) With external 10kΩ pull-up to V_CC.
Logic output low voltage (FAIL) For 6.8k to 10k ohm resistor when pulled up to
5V
For 4.7k to 10k ohm resistor when pulled up to
3.3V
V_CC - 0.6
–
R_IN
Differential input impedance Data inputs
--
V_SELF Self-biased common-mode
--
input voltage
V_INCM
Common-mode
compliance voltage
input Data inputs
V_CC3 -
1.45
V_IN(DIFF) Differential input voltage
= 2 x (D_IN+_HIGH - D_IN+_LOW)
200
V_CC3THL⁽³⁾ 3.3V supply detection, lower
2.5
threshold
V_CC3THH(3) 3.3V supply detection, upper
3.65
threshold
V_CC5THL 5V supply detection, lower
3.9
threshold
V_CC5THH 5V supply detection, upper
5.45
threshold
V_REF1 Reference voltage for MOD_SET
1.8
V_APCSET Reference voltage for APC_SET
V_BL
Bias_OK lower voltage
0.88
threshold
Typ.
–
1
–
–
2.4
1.2
–
–
6800
V_CC3 - 1.3
–
–
2.8
3.8
4.25
5.8
1.3
1.35
1.0
Max.
1500
100
5.5
0.8
–
0.4
–
--
V_CC3-[V_IN(Diff)]/4
2400
2.9
4.1
4.65
6.2
1.4
1.05
Units
µA
A/A
pF
V
V
V
V
V
V
Ω
V
V
mVpp
V
V
V
V
V
V
V
5
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
http://www.macom.com/support