M02069_17 Datasheet, PDF (14/45 Pages) M/A-COM Technology Solutions, Inc. – 3.3 or 5 Volt VCSEL/FP Laser Driver IC for Applications to 4.3 Gbps

M02069-12
3.3 or 5 Volt VCSEL/FP Laser Driver IC for Applications to 4.3 Gbps
Rev V2
Table 2-1. Pin Definitions
Pin Number Pin Name
Pin equivalent load
V_CC
Function
Safety circuit fault output (TTL/CMOS). Goes high when a safety logic fault is detected.
This output will also be high when DIS is high.
Requires an external pull-up.
FAIL
6
FAIL
Safety circuit reset. Leave open for normal operation or add a capacitor to ground to
V_CC
V_{CC3 extend the reset time.}
Connect to GND to disable window comparators at APC_SET
7
RESET
RESET
190 Ω
14
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
http://www.macom.com/support