|
M02050_17 Datasheet, PDF (5/28 Pages) M/A-COM Technology Solutions, Inc. – 3.3/5V Limiting Amplifier for Applications to 2.5 Gbps | |||
|
◁ |
Product Specification
1.4
AC Characteristics
VCC = +3.3V ± 7.5% or +5V ± 7.5%, TA = -40°C to +85°C, input bit rate = 2.5 Gbps 223-1 PRBS, high rate
mode (RATESEL = High) unless otherwise noted.
Typical specifications are for VCC = 3.3V, TA = 25°C, unless otherwise noted.
Table 1-4. AC Characteristics
Symbol
Parameter
Conditions
Min Typ Max Units
VIN(MIN)) Differential Input Sensitivity
VI(MAX)
Input Overload
1.25 Gbps, BER < 10-12, low rate mode
(RATESEL = low)
2.125 Gbps, BER < 10-12, low rate mode
(RATESEL = low)
2.5 Gbps, BER < 10-12
BER < 10-12, differential input 2.5 Gbps
BER < 10-12, single-ended input, 2.5 Gbps
â
2
2.75 mV
â
3
4.75 mV
â
3.5
5
mV
1200
â
â
mV
600
â
â
mV
vn
RSSIpp
RMS Input Referred Noise
Peak-to-peak received signal
strength indicator range
RATESEL = high
Differential input signal range
â
280
â
µVRMS
4
â
100
mV
BWLF
Small-Signal â3dB Low Frequency Excluding AC coupling capacitors
Cutoff
â
25
â
kHz
DJ
Deterministic Jitter (includes DCD) K28.5 pattern at 2.5 Gbps, 10 mVPP input
â
RJ
Random Jitter
10 mVPP input
â
20% to 80%; outputs terminated into 50 â¦;
10 mVPP input
tr / tf
Data Output Rise and Fall Times RATESEL = High
â
RATESEL = Low
â
TRATESEL Rate select assert / deassert time Time from when rate select is asserted high or low
â
until amplifier is performing at selected bandwidth
18
25
ps
3.9
â
psRMS
ps
110
125
145
180
â
10
µs
VLOS
LOS Programmable Range
HYS
Signal Detect Hysteresis
Differential inputs
electrical; across LOS programmable range
5
â
55
mV
2
3.5
5.5
dB
ASSERTLOW Low Input LOS Assert threshold RST = 7.50 kâ¦, differential input
DEASSERTLOW Low Input LOS De-Assert threshold RST = 7.50 kâ¦, differential input
ASSERTMED Medium Input LOS Assert threshold RST = 6.81 kâ¦, differential input
DEASSERTMED Medium Input LOS De-Assert
threshold
RST = 6.81 kâ¦, differential input
3.5
4.9
â
mVPP
â
7.8
11.3 mVPP
8.4
11.7
â
mVPP
â
17.0
24.6 mVPP
ASSERTHI
DEASSERTHI
TLOS_ON
High Input LOS Assert threshold RST = 6.19 kâ¦, differential input
High Input LOS De-Assert threshold RST = 6.19 kâ¦, differential input
Time from LOS state until LOS
output is asserted (1)
LOS assert time after 1 VPP input signal is turned
off; signal detect level set to 10 mV
16.6 23.2
â
mVPP
â
33.4
48.4 mVPP
2.3
â
80
µs
02050-DSH-002-F
Mindspeed Technologiesâ¢
3
Mindspeed Proprietary and Confidential
|
▷ |