MA4SW101-287T Datasheet, PDF (4/4 Pages) Tyco Electronics – Surface Mount Monolithic PIN Diode Switches

MA4SW101-287T
Surface Mount Monolithic PIN Diode Switches
50 MHz - 4 GHz
Mounting Information
The illustration indicates the recommended
mounting pad configuration for the SOT-23,
package. Solder paste containing flux should be
screened onto the pads to a thickness of 0.005-
0.007 inches. The plastic package is placed in
position, firmly adhering to the solder paste.
Permanent attachment is performed by a reflow
soldering procedure during which the tab
temperature does not exceed +275 °C and the body
temperature does not exceed +250 °C.
Please refer to Application Note M538 for surface
mounting instructions.
SOT-23
.035 _min.
0.90
Rev. V3
.030 _min.
0.80
.090
2.2
.037
0.95
0.75
1.9
Dimenstions: ^inches
mm
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.