MA4SW101-287T Datasheet, PDF (2/4 Pages) Tyco Electronics – Surface Mount Monolithic PIN Diode Switches

MA4SW101-287T
Surface Mount Monolithic PIN Diode Switches
50 MHz - 4 GHz
Electrical Specifications at +25°C
Parameter¹
Frequency
Units
Min.
Typ.
Insertion Loss
50 MHz
1 GHz
2 GHz
3 GHz
4 GHz
dB
—
0.3
dB
—
0.3
dB
—
0.3
dB
—
0.4
dB
—
0.5
Isolation
50 MHz
1 GHz
2 GHz
3 GHz
4 GHz
dB
60
70
dB
40
46
dB
30
36
dB
—
30
dB
—
26
Input Return Loss
Voltage Rating²
50 MHz
1 GHz
2 GHz
3 GHz
4 GHz
dB
25
28
dB
20
23
dB
17
21
dB
—
18
dB
—
15
—
Volts
50
—
Second Harmonic Distortion @ 0dBm
1 GHz
dBc
—
75
Third Harmonic Distortion
@ 0dBm
1 GHz
dBc
—
90
Switching Speed
nsec
—
50
Signal Compression
@ 100mW
1 GHz
dB
—
0.1
1. Parameters (except for voltage rating) are specified with +/-20mA at all output ports in 50 Ω microstrip test fixture.
2. Reverse current will not exceed 10 μA at the rated voltage.
Rev. V3
Max
0.4
0.5
0.5
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.