M02044CG-31 Datasheet, PDF (4/22 Pages) M/A-COM Technology Solutions, Inc. – 3.3/5V Limiting Amplifier for Applications from 100 Mbps to 622 Mbps

Product Specification
1.3
DC Characteristics
V_CC = +3.3V ± 7.5% or +5V ± 7.5%, T_A = -40°C to +85°C, unless otherwise noted.
Typical specifications are for V_CC = 3.3V, T_A = 25°C, unless otherwise noted.
Table 1-3. DC Characteristics
Symbol
Parameter
Conditions
Min
Typ
Max Units
I_CC
V_OUTHpecl
V_OUTLpecl
Supply Current
PECL Output High Voltage ^(1,2)
(PECLP, PECLN)
PECL Output Low Voltage ^(1,2)
(PECLP, PECLN)
PECL outputs un-loaded
Single ended; 50Ω load to V_CC - 2V
Single ended; 50Ω load to V_CC - 2V
–
26
38
mA
V_CC-1.06 V_CC-0.952 V_CC-0.88
V
V_CC-1.86
V_CC-1.71 V_CC-1.62
V
R_INDIFF Differential Input Resistance Measured between DINP and DINN
90
110
130
Ω
V_{OH_CMOS} ST, LOS Output High Voltage External 4.7-10 kΩ pull up to V_CC
2.75
V_CC
–
V
V_{OL_CMOS} ST, LOS Output Low Voltage External 4.7-10 kΩ pull up to V_CC
0
–
0.4
V
I_{OL_CMOS} ST, LOS Output Low Current V_OL determined by external pull up to V_CC
–
(into device)
–
2.0
mA
V_IH
JAM Input High Voltage
2.7
–
V_CC
V
V_IL
JAM Input Low Voltage
–
–
0.8
V
Notes:
1. Limits apply between 0°C to +85°C. Below 0°C the minimum decreases by up to 40 mV.
2. In most applications the PECL outputs are AC coupled to the following device, so the actual VOH and VOL levels are not meaningful for the PECL
outputs. Only the peak to peak swing is transmitted to the load device.
02044-DSH-002-A
Mindspeed Technologies™
2
Mindspeed Proprietary and Confidential