M02040-15 Datasheet, PDF (4/31 Pages) M/A-COM Technology Solutions, Inc. – 3.3 5V Limiting Amplifier for Applications to 2.125 Gbps

M02040-15
3.3/5V Limiting Amplifier for Applications to 2.125 Gbps
Rev V4
1.0 Product Specification
1.1
Absolute Maximum Ratings
These are the absolute maximum ratings at or beyond which the IC can be expected to fail or be damaged. Reli-
able operation at these extremes for any length of time is not implied.
NOTE:
The package bottom should be adequately grounded to ensure correct thermal performance,
and it is recommended that vias are inserted through to a lower ground plane.
Table 1-1. Absolute Maximum Ratings
Symbol
Parameter
V_CC
T_STG
PECLP, PECLN
I(PECLP), I(PECLN)
|DINP - DINN|
DINP, DINN
ST_SET
JAM
LOS
Power supply voltage (V_CC-GND)
Storage temperature
PECL Output pins voltage
PECL Output pins maximum continuous current (delivered to load)
Data input pins differential voltage
Data input pins voltage meeting |DINP - DINN| requirement
Signal detect threshold setting pin voltage
Output enable pin voltage
Status Output pins voltage
DC_Servo
I_REF
I(RSSI_AVG)
RSSI_PP
I(LOS)
DC_Servo disable input pin voltage
Current into Reference input
Current into RSSIavg input
RSSI_PP pin voltage
Current into Loss of Signal pin
Rating
-0.5 to +5.75
-65 to +150
V_CC - 2 to V_CC + 0.4
30
0.80
GND to V_CC3 + 0.4
GND to V_CC3 + 0.4
GND to V_CC + 0.4
GND to V_CC + 0.4
GND to V_CC + 0.4
+0 to -120
+0 to -3
GND to V_CC3 + 0.4
+3000 to -100
Units
V
°C
V
mA
V
V
V
V
V
V
µA
mA
V
µA
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
http://www.macom.com/support