M02040-15 Datasheet, PDF (12/31 Pages) M/A-COM Technology Solutions, Inc. – 3.3 5V Limiting Amplifier for Applications to 2.125 Gbps

M02040-15
3.3/5V Limiting Amplifier for Applications to 2.125 Gbps
Rev V4
3.2
Features
• Operates with a 3.3V or 5V supply
• 2 mV typical input sensitivity at 1.25 Gbps
• PECL outputs
• Average Receive power monitor output (RSSI_AVG)
• Peak-to-peak Receive power monitor output (RSSI_PP)
• On-chip DC offset cancellation circuit
• Offset cancellation circuit can be disabled for Burst mode applications
• Low power (170 mW at 3.3V)
• Output Jam function
• 16-pin 3x3 mm QFN package
3.3
General Description
The M02040-15 is an integrated high-gain limiting amplifier. Featuring PECL outputs, the M02040-15 is useable in
applications to 2.125 Gbps. Full output swing is achieved even at minimum input sensitivity. The M02040-15 can
operate with a 3.3V or 5V supply.
DC_Servo supports applications requiring instantaneous output response.
The M02040-15 also includes two analog RSSI outputs proportional to either the average or peak to peak input sig-
nal and a programmable signal-level detector allowing the user to set thresholds at which the logic outputs are
enabled.
12
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
http://www.macom.com/support