PINDIODESCHIP_15 Datasheet, PDF (3/7 Pages) M/A-COM Technology Solutions, Inc. – Silicon PIN Chips

Silicon PIN Chips
V20
CERMACHIP^® PIN Chips Specification @ T_AMB = +25°C
Part Number
MA4P303-134
MA4P404-132
Unless
Unless
otherwise noted otherwise noted
Nominal Characteristics
Max. Rev.
Volt.⁵
V_{R < 10 µA}
V_DC
200
Max. Cap.
1 MHz
C_{J @ -100 V}
pF
0.15 @ 10 V
Max. Series Res.
100 MHz
R_{S @ 100 mA}
Ω
Carrier I Region
Lifetime⁴ Length
μS
μm
Theta
°C/W
1.5 @ 10 mA²
0.3
20
30
Anode
Dia.
± 0.5
mils
3.0
Chip
size
± 2.0
mils
13X13
250
0.20 @ 50 V
0.70 @ 50 mA²
0.6
30
20
6.8 20X20
Chip
Thk.
± 1.0
mils
10.0
10.0
MA4P504-132
500
0.20
0.60
1
50
20
6.8 20X20 10.0
MA4P505-131
500
0.35
0.45
2
50
14 13.0 27X27 11.0
MA4P506-131
500
0.70
0.30
3
50
11 15.8 27X27 12.0
MADP-000488-13740W 900
0.16 @ 50V
1.6 @ 50 mA
4
140
45 12.2 23X23 13.5
MA4P604-131
1000
0.30
1.00
3
90
10 17.0 27X27 13.5
MA4P606-131
1000
0.60
0.70
4
90
8
21.0 32X32 14.0
MA4P607-212
MA4PK2000-223¹
MA4PK3000-1252¹
1000
2000
3000
1.30
0.40
12
127
4
37.0 62X62 18.5
2.40
0.20 @ 500 mA³
30
230
2
72.0 111X111 21.0
2.90
0.25 @ 500 mA³
60
350
1.5 85.0 172X172 28.0
Notes:
1. Upon completion of circuit installation, the chip must be covered with a dielectric conformal coating
such as SYLGARD 539^® to prevent voltage arcing.
2. Test Frequency = 500 MHz
3. Test Frequency = 4 MHz
4. Nominal carrier lifetime (T_L) specified at I_F = +10 mA , I_REV = - 6 mA.
5. Minimum specified V_R (Reverse Voltage) is sourced and the resultant reverse leakage current (I_REV) is
measured to be <10 μA.
Anode
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.