MAAM-009455_15 Datasheet, PDF (3/7 Pages) M/A-COM Technology Solutions, Inc. – Push Pull CATV Amplifier

MAAM-009455
Push Pull CATV Amplifier
50 - 1000 MHz
Absolute Maximum Ratings ^6,7,8
Parameter
RF Input Power
Voltage
Operating Temperature
Junction Temperature⁹
Absolute Maximum
6 dBm
15.0 volts
-40°C to +85°C
+150°C
Storage Temperature
-65°C to +150°C
6. Exceeding any one or combination of these limits may cause
permanent damage to this device.
7. M/A-COM Technology Solutions does not recommend
sustained operation near these survivability limits.
8. These operating conditions will ensure MTTF > 1 x 10⁶ hours.
9. Junction Temperature (T_J) = T_C + Ó¨jc * (V * I)
Typical thermal resistance (Өjc) = 15° C/W.
a) For T_C = 25°C,
T_J = 71°C @ 8 V, 385 mA
b) For T_C = 85°C,
T_J = 130°C @ 8 V, 375 mA
Land Pattern¹⁰
Rev. V1
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
An external protection circuit using an inexpensive
anti-parallel diode pair can be used to protect the
IC. Please reference application note AN3028 on
http://www.macomtech.com for further detail.
10. Vias to be plated solid copper.
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support