English
Language : 

MAAM-009455_15 Datasheet, PDF (2/7 Pages) M/A-COM Technology Solutions, Inc. – Push Pull CATV Amplifier
MAAM-009455
Push Pull CATV Amplifier
50 - 1000 MHz
Electrical Specifications: TA = 25°C, Freq: 1000 MHz, VDD = +8 Volts, Z0 = 75 Ω,
Test Circuit with M/A-COM Technology Balun MABA-009210-CT1760
Parameter
Test Conditions
Units
Gain
—
dB
Gain Flatness
—
dB
Noise Figure
—
dB
Reverse Isolation
—
dB
Input Return Loss
—
dB
Output Return Loss
—
dB
Output IP2
Two tones at 500 & 506 MHz, +8 dBm output/tone dBm
Output IP3
Two tones at 500 & 506 MHz, +8 dBm output/tone dBm
Composite Triple Beat, CTB 77 Channels, +39 dBm V / Channel at the output dBc
Composite Second Order, CSO 77 Channels, +39 dBm V / Channel at the output dBc
Cross modulation
77 Channels, +39 dBm V / Channel at the output dBc
P1dB
500 MHz
dBm
IDD
+8 Volts
mA
Min.
19.5
—
—
—
—
—
—
41
—
—
—
—
—
Typ.
20.5
0.5
5.5
36
22
15
80
43
-70
-70
-70
26
325
Rev. V1
Max.
23
—
—
—
—
—
—
—
—
—
—
—
385
Electrical Specifications: Frequency: 500 MHz, 256 QAM
Parameter
Test Conditions
Units
Adjacent channel up to 750 KHz from channel
block edge
POUT = +60 dBmV, N=1
POUT = +56 dBmV, N=2
POUT = +52 dBmV, N=4
dBc
Adjacent channel
POUT = +60 dBmV, N=1
(750 kHz from channel block edge to 6 MHz
POUT = +56 dBmV, N=2
dBc
from channel block edge)
POUT = +52 dBmV, N=4
Next-adjacent channel
POUT = +60 dBmV, N=1
(6 MHz from channel block edge to 18 MHz
POUT = +56 dBmV, N=2
dBc
from channel block edge)
POUT = +52 dBmV, N=4
Third-adjacent channel
POUT = +60 dBmV, N=1
(12 MHz from channel block edge to 18 MHz
POUT = +56 dBmV, N=2
dBc
from channel block edge)
POUT = +52 dBmV, N=4
In each of 2N contiguous 6 MHz channels or
in each of 3N contiguous 6 MHz channels
coinciding with 2nd harmonic and with 3rd
harmonic components respectively
POUT = +60 dBmV, N=1, 2nd Harmonic
POUT = +60 dBmV, N=1, 3rd Harmonic
dBc
(up to 1000 MHz)
Ref Spec5 Typical data
<-58
-65
<-58
-65
<-58
-66
<-62
-67
<-60
-64
<-60
-63
<-65
-75
<-64
-70
<-63
-65
<-73
-76
<-70
-73
<-65
-68
–63
-70
–63
-65
5. Reference Specification Data-Over-Cable Service Interface Specifications, DOCSIS. Downstream RF Interface Specification, DRFI.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support