XB1014-QT_15 Datasheet, PDF (2/6 Pages) M/A-COM Technology Solutions, Inc. – Buffer Amplifier

XB1014-QT
Buffer Amplifier
37.0 - 40.0 GHz
Electrical Specifications: 37-40.15 GHz (Ambient Temperature T = 25°C)
Parameter
Input Return Loss (S11)
Output Return Loss (S22)
Small Signal Gain (S21)
Units
dB
dB
dB
Min.
-
-
17.0
Typ.
7.0
10.0
21.0
Reverse isolation (S12)
dB
-
40.0
Output Power for 1dB Compression Point (P1dB)
dBm
-
20.0
Saturated Output Power (Psat)
Output IP3 (Psci = 4 dBm)
dBm
19.5
22.0
dBm
27.0
30.5
Drain Bias Voltage (Vd1,2,3)
Gate Bias Voltage (Vg1,2,3)
Supply Current (Id1,2,3)
V
-
4.0
V
-1.0
-0.3
mA
-
250
Rev. V2
Max.
40.0
-
-
24.5
-
-
-
4.0
-0.1
300
Absolute Maximum Ratings ^2,3
Parameter
Supply Voltage (Vd1,2,3)
Absolute
Max.
+4.3 V
Supply Voltage (Vg1,2,3)
-1.5V < Vg < 0V
Input Power (Pin)
+20 dBm
Abs. Max Junction/Channel Temp
MTTF Graph
Max. Operating Junction/Channel Temp
150°C
Continuous Power Dissipation (Pdiss) at
85°C
Thermal Resistance
1.2 W
47°C/W
Operating Temperature (Ta)
-55°C to MTTF
Graph
Storage Temperature (Tstg)
Mounting Temperature
ESD Min. - Machine Model (MM)
-65°C to +165°C
See solder
reflow profile
Class A
ESD Min. - Human Body Model (HBM) Class 1A
MSL Level
MSL1
2. Channel temperature directly affects a device's MTTF.
Channel temperature should be kept as low as possible to
maximize lifetime.
3. For saturated performance it is recommended that the sum of
(2*Vdd + abs (Vgg)) <9V
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.