XB1014-QT_15 Datasheet, PDF (1/6 Pages) M/A-COM Technology Solutions, Inc. – Buffer Amplifier

XB1014-QT
Buffer Amplifier
37.0 - 40.0 GHz
Features
• 21.0 dB Small Signal Gain
• +22.0 dBm Psat
• +20.0 dBm P1dB
• +30.5 dBm Output IP3
• Variable Gain with Adjustable Bias
• Lead-free 3 mm 16-lead PQFN Package
• 100% RF, DC and Output Power Testing
• RoHS* Compliant and 260°C Reflow Compatible
Description
The XB1014-QT is a three stage 37.0-40.0 GHz
GaAs MMIC buffer amplifier that has a small signal
gain of 21.0 dB and 20.0 dBm P1dB output
compression point. The device also provides
variable gain regulation with adjustable bias. The
device is ideally suited as an LO or RF buffer stage
with broadband performance at a very low cost.
The device comes in an RoHS compliant 3x3mm
QFN surface mount package offering excellent RF
and thermal properties. This device has been
designed for use in 38 GHz Point-to-Point
Microwave Radio applications.
Ordering Information
Part Number
XB1014-QT-0G00
XB1014-QT-0G0T
XB1014-QT-EV1
Package
bulk quantity
tape and reel
evaluation board
Functional Schematic
VD1 VD2 VD3
Rev. V2
GND
RFIN
GND
GND
RFOUT
GND
VG1 VG2 VG3
Pin Configuration¹
Pin No. Function Pin No. Function
3
RF Input
10
RF Output
5
Gate 1 Bias
13
Drain 3 Bias
6
Gate 2 Bias
14
Drain 2 Bias
7
Gate 3 Bias
15
Drain 1 Bias
1. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.