MAFLCC0001 Datasheet, PDF (2/4 Pages) Tyco Electronics – Low Cost SMT Dual Band Diplexer AMPS/PCS and GSM/DCS

MAFLCC0001
Low Cost SMT Dual Band Diplexer
AMPS/PCS and GSM/DCS
Rev. V2
824 – 960 / 1850 – 1990 MHz Electrical Specifications: T_A = 25°C, Z₀ = 50Ω
Parameter
Passband Insertion Loss
Stopband Isolation
Passband VSWR
Units
dB
dB
—
Min
—
12
—
Typ
0.5
18
1.4:1
880 – 960 / 1700 – 1900 MHz Electrical Specifications: T_A = 25°C, Z₀ = 50Ω
Parameter
Passband Insertion Loss
Stopband Isolation
Passband VSWR
Units
dB
dB
—
Min
—
12
—
Typ
0.5
18
1.5:1
Max
0.8
—
1.7:1
Max
0.9
—
1.8:1
Absolute Maximum Ratings ^3,4
Parameter
Input Power
Operating Temperature
Storage Temperature
Absolute Maximum
2W CW
-40°C to +85°C
-65°C to +150°C
3. Exceeding any one or combination of these limits may
cause permanent damage to this device.
4. M/A-COM does not recommend sustained operation near
these survivability limits.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
GMIC Circuits are sensitive to electrostatic
discharge (ESD) and can be damaged by static
electricity. Proper ESD control techniques should
be used when handling these devices.
Recommended PCB Configuration
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.