MAFLCC0001 Datasheet, PDF (1/4 Pages) Tyco Electronics – Low Cost SMT Dual Band Diplexer AMPS/PCS and GSM/DCS

MAFLCC0001
Low Cost SMT Dual Band Diplexer
AMPS/PCS and GSM/DCS
Rev. V2
Features
• Small Size and Low Profile
• Superior Repeatability
• Passbands 824 – 960 MHz and 1850 – 1990
MHz
• Passbands 880 – 960 MHz and 1700 – 1900
MHz
• Typical Passband Insertion Loss: 0.5 dB
• 2 Watt Power Handling
• Low Cost
• Lead-Free SO-8 Package
• 100% Matte Tin Plating over Copper
• Halogen-Free “Green” Mold Compound
• 260°C Reflow Compatible
• RoHS* Compliant Version of DP52-0002
Functional Block Diagram^1,2
Description
M/A-COM’s MAFLCC0001 is an IC-based monolithic
diplexer in a low cost SOIC-8 SMT plastic package.
This diplexer is ideally suited for applications where
small size, low insertion loss, superior repeatability,
and low cost are required. Typical applications in-
clude AMPS/PCS and GSM/DCS dual mode port-
able devices.
The MAFLCC0001 is fabricated using a passive-
integrated circuit process. The process features full-
chip pssivation for increased performance and reli-
ability.
Ordering Information
Part Number
MAFLCC0001
MAFLCC0001-TR
MAFLCC0001-TB
Package
Bulk Packaging
1000 piece reel
Sample Test Board
Note: Reference Application Note M513 for reel size
information.
1. All unused pins must be RF and DC grounded.
2. Pins 1 and 4 are thermal ground contacts.
Pin Configuration
Pin No.
1
2
3
4
Function
GND
AMPS IN/OUT
GND
GND
Pin No.
5
6
7
8
Function
PCS IN/OUT
GND
ANTENNA
GND
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.