English
Language : 

MA4SW510 Datasheet, PDF (2/7 Pages) Tyco Electronics – SP5T PIN Diode Reflective Switch
MA4SW510
HMIC™ Silicon SP5T PIN Diode Switch
RoHS Compliant
V5
Typical Driver Connections
Control Level ( DC Current ) at Port
Condition Condition Condition Condition Condition
of
of
of
of
of
RF Output RF Output RF Output RF Output RF Output
J2
J3
J4
J5
J6
J2 - J1 J3 - J1 J4 - J1 J5 - J1 J6 - J1
-20 mA +20 mA +20 mA +20 mA +20 mA Low Loss Isolation Isolation Isolation Isolation
+20 mA -20 mA +20 mA +20 mA +20 mA Isolation Low Loss Isolation Isolation Isolation
+20 mA +20 mA -20 mA +20 mA +20 mA Isolation Isolation Low Loss Isolation Isolation
+20 mA +20 mA +20 mA -20 mA +20 mA Isolation Isolation Isolation Low Loss Isolation
+20 mA +20 mA +20 mA +20 mA -20 mA Isolation Isolation Isolation Isolation Low Loss
Compatible M/A-COM Tech Drivers (Combination of both drivers is required)
MADR-007097-000100 & MADR-009190-000100
RF Electrical Specifications @ TAMB = 25°C, ± 20mA bias current (probed on-wafer measurements)
Parameter
Frequency
Minimum Nominal Maximum Units
Insertion Loss
20 GHz
0.9
1.4
dB
Isolation
20 GHz
28
38
dB
Input Return Loss
20 GHz
22
dB
Output Return Loss
Switching Speed1
20 GHz
10 GHz 1
23
dB
50
nS
Note:
1.) Typical switching speed is measured from 10% to 90% of the detected RF voltage driven by a TTL compatible
driver. Driver output parallel RC network uses a capacitor between 390pF - 560pF and a resistor between 150Ω
- 220Ω to achieve 50ns rise and fall times.
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for
• North America Tel: 800.366.2266 / Fax: 978.366.2266
development. Performance is based on target specifications, simulated results, and/or prototype
measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under develop-
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
been fixed. Engineering samples and/or test data may be available. Commitment to produce in
volume is not guaranteed.
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or
information contained herein without notice.