English
Language : 

MA4P7441F-1091T_2 Datasheet, PDF (2/6 Pages) M/A-COM Technology Solutions, Inc. – Non Magnetic SMQ MELF PIN Diode
MA4P7441F-1091T
Non Magnetic SMQ MELF PIN Diode
V2
Parameter
Electrical Specifications @ +25 °C
Symbol
Condition
Minimum
Forward Voltage
VF
IF = +100 mA
-
Voltage Rating
VR
Ir = -10 uA
l –100 l VDC
Total Capacitance
CT
-100 V @ 100 MHz
-
Series Resistance
RS
+100 mA @ 100 MHz
-
Parallel Resistance
Carrier Lifetime
I-Region Length
RP
-10 V @ 100 MHz
20 K Ω
τL
+6 mA / -10 mA
(50% - 90% Voltage)
-
μm
-
-
C.W. Thermal Resistance
θ
-
-
Power Dissipation in Free Air
W
IF = +100 mA
-
Power Dissipation
PD
IF = +100 mA
-
Maximum
.9 VDC
-
2.2 pF
0.5 Ω
-
-
-
5°C/W
9W
30W
Nominal
-
-
-
-
-
18 µs
175 μm
-
-
-
Environmental Capability
MELF devices are appropriate for use in industrial and military applications and can be screened to meet the
environmental requirements of MIL-STD-750, MIL-STD-202 as well as other military standards. The table below
lists some of the MIL-STD 750 tests the device is designed to meet.
Test
High Temperature Storage
Temperature Shock
HTRB
Moisture Resistance
Gross Leak
Vibration Fatigue
Solderability
Method
1031
1051
1038
1021
1071 Cond. E
2046
2026
Description
+150°C, for 340 Hours
-65°C to +150°C, 20 Cycles
80% of rated VB, +150°C, for 96 Hours
No Initial Conditioning, 85% RH, +85°C
Dye Penetrant Visual
20,000G’s, 60Hz, x, y, z axis
Test Temperature = +245°C
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.