MA4AGSW2 Datasheet, PDF (2/7 Pages) Tyco Electronics – AlGaAs SP2T PIN Diode Switch

MA4AGSW2
SPDT AlGaAs PIN Diode Switch
RoHS Compliant
Rev. V4
Electrical Specifications @ T_A = 25°C, +/-10mA bias current
(On-wafer measurements)
PARAMETER
INSERTION LOSS
RF SPECIFICATIONS
FREQUENCY BAND
MIN
0.05 - 18GHz
---
18 - 50GHz
---
TYP
MAX UNITS
0.5
0.6
dB
0.7
0.9
dB
ISOLATION
0.05 - 18GHz
18 - 50GHz
45
47
---
dB
28
33
---
dB
INPUT RETURN LOSS
0.05 - 18GHz
18 - 50GHz
---
22
---
dB
---
21
---
dB
OUTPUT RETURN LOSS
SWITCHING SPEED^*
( 10 % - 90 % RF VOLTAGE )
0.05 - 18GHz
18 - 50GHz
10GHZ
---
25
---
dB
---
22
---
dB
---
20
---
nS
*Note:
Typical switching speed is measured from 10% to 90% of the detected RF voltage driven by a TTL
compatible driver. Driver output parallel RC network uses a capacitor between 390 pF - 560 pF and
a resistor between 150 - 220 Ohms to achieve 20 ns rise and fall times.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.