DS-ETC4-1-2 Datasheet, PDF (2/4 Pages) M/A-COM Technology Solutions, Inc. – E-Series RF 1:4 Flux Coupled Step-up Transformer

ETC4-1-2TR
E-Series RF 1:4 Flux Coupled Step-up Transformer
2 – 800 MHz
Electrical Specifications: T_A = 25°C, Z₀ = 50 ¹
Parameter
RF Frequency
Insertion Loss
Amplitude Unbalance
Phase Unbalance
Test Conditions
—
F_L— f_U
—
—
Frequency
2 - 800
10 - 100
5 - 600
2 - 800
10 - 100
2 - 800
10 - 500
2 - 800
Rev. V4
Units
Min
Typ
Max
MHz
—
—
—
dB
—
dB
—
dB
—
dB
—
dB
—
Degrees
—
Degrees
—
—
1.0
1.21
2.0
—
3.0
—
0.25
—
1.0
—
2.0
—
10.0
6. External DC blocking capacitors are required on all RF ports (39 pF capacitors are recommended).
Absolute Maximum Ratings ^4,5
Parameter
DC Power
Absolute Maximum
250mW
DC Current
Operating Temperature
Storage Temperature
30mA
-55°C to +85°C
-55°C to +125°C
4. Exceeding any one or combination of these limits may cause
permanent damage to this device.
5. M/A-COM does not recommend sustained operation near
these survivability limits.
† Reference Application Note M538 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 1 requirements.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.