DS-ETC4-1-2 Datasheet, PDF (1/4 Pages) M/A-COM Technology Solutions, Inc. – E-Series RF 1:4 Flux Coupled Step-up Transformer

ETC4-1-2TR
E-Series RF 1:4 Flux Coupled Step-up Transformer
2 – 800 MHz
Features
 1:4 Impedance Ratio
 CT on Secondary
 Surface Mount
 Tape and reel packaging available
Description
M/A-COM’s ETC4-1-2 is a 1:4 RF flux coupled step-
up transformer in a low cost, surface mount
package. Ideally suited for high volume cellular and
wireless applications. Typical applications include
single to balanced mode conversion and impedance
matching. Parts are packaged in tape & reel.
Schematic
Primary Dot 4
Primary 5
Rev. V4
3 Secondary Dot
2 Secondary CT
1 Secondary
Product Image
SM-22 package
Pin Configuration
Pin No.
1
2
3
4
5
Function
Secondary
Secondary CT
Secondary Dot
Primary Dot
Primary
3. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
123
54
 Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.