AM-176_15 Datasheet, PDF (2/4 Pages) M/A-COM Technology Solutions, Inc. – Cascadable Thin Film Amplifier

AM-176 / AMC-176
Cascadable Thin Film Amplifier,
13 dB Gain, 5 - 1000 MHz
Electrical Specifications: ^2,3 TA = -55°C to +85°C Case Temperature
Parameter
Test Conditions
Frequency Units
Min.
Typ.
Gain
@+25^oC
500 MHz
dB
12.2
13.2
Rev. V4
Max.
14.2
Frequency Response
—
5 - 1000 MHz
dB
—
—
±1.0
Gain Variation with
Temperature
1 dB Compression
—
Output Power
5 - 1000 MHz
dB
—
—
±1.0
5 - 1000 MHz
dBm
+12
—
—
Noise Figure
—
5 - 1000 MHz
dB
—
—
5.0
Reverse Transmission
VSWR
—
5 - 1000 MHz
dB
—
-17
-14
—
5 - 1000 MHz
Ratio
—
—
1.8:1
Output IP₂
Output IP₃
Vbias
Ibias
Power Dissipation
Two-Tone inputs up to 0 dBm
Two-Tone inputs up to 0 dBm
—
Vbias = +15.0 VDC
@ +15 V Bias
5 - 1000 MHz
5 - 1000 MHz
—
—
—
dBm
dBm
VDC
mA
mW
+37
+25
+14.5
—
—
—
—
+15.0
38
570
—
—
+15.5
43
—
2. All specifications apply when operated at +15 VDC, with 50 ohms source and load impedance.
3. Heat Sinking: Operation at case temperature above 95°C is not recommended. Heat sinking adequate to dissipate 650 mW must be
provided in use.
S-Parameter Data
Frequency
(MHz)
5
S11
MAG/ANG
0.14/151.3
S21
MAG/ANG
4.59/-168.1
S12
MAG/ANG
0.13/-0.9
S22
MAG/ANG
0.12/144.6
10
0.14/168.4
4.67/-175.5
0.13/0.1
0.10/156.3
20
0.14/178.2
4.61/-179.6
0.13/0.0
0.09/166.5
50
0.14/167.9
4.61/174.5
0.13/-0.1
0.09/170.5
100
0.13/161.6
4.58/168.6
0.13/-1.0
0.08/166.8
250
0.12/132.4
4.56/10.1
0.14/-3.5
0.08/149.9
500
0.10/83.9
4.57/119.8
0.15/-9.0
0.07/121.3
750
0.08/39.7
4.52/89.1
0.16/-17.7
0.05/76.1
1000
0.04/-91.4
4.39/58.4
0.16/-28.4
0.07/-9.9
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support