AM-176_15 Datasheet, PDF (1/4 Pages) M/A-COM Technology Solutions, Inc. – Cascadable Thin Film Amplifier

AM-176 / AMC-176
Cascadable Thin Film Amplifier,
13 dB Gain, 5 - 1000 MHz
Features
 4.0 dB Typical Noise Figure
 13.5 dBm Typical Midband 1 dB Compression
 1.25:1 Typical VSWR
Description
M/A-COM’s AM-176 is a feedback amplifier with high
intercept and compression points. This amplifier is
packaged in a TO-8 package. Due to the internal
power dissipation the thermal rise should be
minimized. The ground plane on the PC board
should be configured to remove heat from under the
package. AM-176 is ideally suited for use where a
high intercept, high reliability amplifier is required.
TO-8-1
Rev. V4
Ordering Information
Part Number
AM-176 PIN
AMC-176 SMA
Package
TO-8-1
Connectorized
Absolute Maximum Ratings ¹
Parameter
Max. Input Power
Vbias
Operating Temperature
Storage Temperature
Absolute Maximum
+10 dBm
+15.75 V
-55°C to +85°C
-65°C to +125°C
1. Operation of this device above any one of these parameters
may cause permanent damage.
Outline Drawing: SMA Connectorized ^*
 Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support