AM-146_15 Datasheet, PDF (2/4 Pages) M/A-COM Technology Solutions, Inc. – High Performance Amplifier

AM-146/AMC-146
High Performance Amplifier,
21 dB Gain, 10 - 500 MHz
Electrical Specifications: ^2,3 TA = -55°C to +85°C Case Temperature
Parameter
Gain
Test Conditions
@+25^oC
Frequency
50 MHz
Units
dB
Min.
20.3
Typ.
21.0
Rev. V3
Max.
21.7
Frequency Response
Gain Variation with
Temperature
1 dB Compression
—
—
Output Power
10 - 500 MHz
10 - 500 MHz
10 - 500 MHz
dB
dB
dBm
—
—
+20.0
—
±1.0
—
+-0.8, -1.2
—
—
Noise Figure
Reverse Transmission
VSWR
—
10 - 500 MHz
dB
—
—
7.0
10 - 300 MHz
dB
—
—
5.5
—
10 - 500 MHz
dB
—
-35
-30.0
—
10 - 500 MHz
Ratio
—
—
2:1
Output IP₂
Output IP₃
Vbias
Two-Tone inputs up to +10 dBm
Two-Tone inputs up to +10 dBm
—
10 - 500 MHz
10 - 500 MHz
—
dBm
dBm
VDC
+40
+30
+14.5
—
—
+15.0
—
—
+15.5
Ibias
Vbias = +15.0 VDC
—
mA
—
130
140
Power Dissipation
@ +15 V Bias
—
mW
—
2
—
2. All specifications apply when operated at +15 VDC, with 50 ohms source and load impedance.
3. Heat Sinking: Operation at case temperature above 95°C is not recommended. Heat sinking adequate to dissipate 2 W must be provided
in use.
S-Parameter Data
Frequency
(MHz)
10
S11
MAG/ANG
0.13/-118.5
S21
MAG/ANG
11.44/16.8
S12
MAG/ANG
0.02/7.1
S22
MAG/ANG
0.14/164.6
20
0.12/-144.0
11.63/-1.0
0.02/-4.0
0.16/168.2
50
0.13/-175.5
11.56/-27.1
0.02/-25.3
0.15/155.9
75
0.14/169.0
11.49/-44.3
0.02/-41.3
0.13/143.8
100
0.15/163.8
11.45/-59.9
0.02/-55.7
0.08/132.5
200
0.16/121.4
11.24/-120.3
0.02/-113.3
0.05/160.6
300
0.18/86.3
11.34/176.4
0.02/-170.1
0.07/167.7
400
0.20/55.2
11.33/110.4
0.02/133.3
0.12/159.2
500
0.23/13.1
10.84/31.1
0.01/75.6
0.23/174.8
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support