AM-146_15 Datasheet, PDF (1/4 Pages) M/A-COM Technology Solutions, Inc. – High Performance Amplifier

AM-146/AMC-146
High Performance Amplifier,
21 dB Gain, 10 - 500 MHz
Features
 4 dB Typical Midband Noise Figure
 +38 dBm Typical Midband Third Order Intercept
 +24 dBm Typical Midband 1 dB Compression
Description
M/A-COM’s AM-146 is a coupler feedback amplifier
with high intercept and compression points. The use
of coupler feedback minimizes current in a high
intercept amplifier. This amplifier is packaged in a
flatpack with flanges. Due to the metal flatpack the
thermal rise minimized. The ground plane on the PC
board should be configured to remove heat from
under the package. AM-146 is ideally suited for use
where a high intercept, high reliability amplifier is
required.
FP-9
Rev. V3
C-25
Absolute Maximum Ratings ¹
Parameter
Max. Input Power
Vbias
Operating Temperature
Storage Temperature
Absolute Maximum
+10 dBm
+15.75 V
-55°C to +85°C
-65°C to +125°C
1. Operation of this device above any one of these parameters
may cause permanent damage.
Pin Configuration
Pin No.
1
2
3
4
5
Function
RF OUT
GND
GND
GND
VDC
Pin No.
6
7
8
9
10
Function
RF IN
GND
GND
GND
VDC
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support