MAMXSS0013_15 Datasheet, PDF (1/4 Pages) M/A-COM Technology Solutions, Inc. – Low Cost MMIC Mixer

MAMXSS0013
Low Cost MMIC Mixer
1400 - 2100 MHz
Features
• +12 dBm Input Power @ 1 dB Compression
• High Isolation, 28 dB LO to RF
• +3 to +8 dBm LO Drive Level
• DC - 500 MHz 3 dB IF Bandwidth
• Does not require DC bias
• Lead-Free SOT-25 Package
• 100% Matte Tin Plating over Copper
• Halogen-Free “Green” Mold Compound
• 260°C Reflow Compatible
• RoHS* Compliant Version of MD54-0006
Functional Block Diagram
Rev. V2
Description
M/A-COM’s MAMXSS0013 is a passive mixer that
achieves the performance of a double balanced
diode mixer in a lead-free SOT-25 package. The
MAMXSS0013 is ideally suited for use where high
level RF signals and very wide dynamic range are
required. Typical applications include frequency up/
down conversion, modulation and demodulation in
receivers and transmitters for base station and
portable systems.
The MAMXSS0013 uses FETs as mixing elements
to achieve very wide dynamic range in a low cost
plastic package. The mixer operates with LO drive
levels of +3 dBm to +8 dBm. The LO port may be
externally tuned for operation in various frequency
bands.
M/A-COM’s MAMXSS0013 is fabricated using a
mature 0.5 micron gate length GaAs MESFET
process. The process features full passivation for
increased performance and reliability. The
MAMXSS0013 is 100% RF tested to ensure
performance specification compliance.
Ordering Information¹
Part Number
MAMXSS0013
MAMXSS0013TR-3000
MAMX-000013-001SMB
MAMX-000013-002SMB
MAMX-000013-003SMB
Package
Bulk Packaging
3000 piece reel
Sample Board 1500 MHz
Sample Board 1710 MHz
Sample Board 2300 MHz
Pin Configuration
Pin No.
1
2
3
4
5
Pin Name
LO Port
Ground
Ground
RF Port
IF Port
Description
LO Input
Ground
Ground
RF Input
IF Output
External Circuitry Parts List ^2,3
LO Frequency
Part
1500 MHz 1710 MHz 2300 MHz
R1
470 Ω
470 Ω
820 Ω
L1
6.8 nH
4.7 nH
2.7 nH
C1
3.3 pF
2.2 pF
2.2 pF
2. The external LO matching network allows tuning from 1400
MHz to 2300 MHz. The networks given above are
intended to serve as guidelines for matching in different bands.
3. All off-chip components are low-cost surface mount
components obtainable from multiple sources (0.060 in. x
0.030 in. or 0.080 in. x 0.050 in).
1. Reference Application Note M513 for reel size information.
1 ^{* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.}
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.