MAAM-010333_15 Datasheet, PDF (1/11 Pages) M/A-COM Technology Solutions, Inc. – Optical Node RF Amplifier

MAAM-010333
Optical Node RF Amplifier
50 - 1200 MHz
Rev. V4
Features
 -8 dBm to +2 dBm Optical Input Range
 Low Equivalent Input Noise (EIN): 3.2 pA/rtHz
 Single +5 V Bias
 29 dB Gain at 55 MHz; 34 dB Gain at 1000 MHz
 27 dB Gain Control Range
 +24 dBmV/ch Output at 550 MHz
 Lead-Free 4 mm PQFN-24LD Plastic Package
 Halogen-Free “Green” Mold Compound
 RoHS* Compliant and 260°C Reflow Compatible
Description
The MAAM-010333 provides high gain, low noise
and low distortion amplification for optical node
applications.
The MAAM-010333 is fabricated using M/A-COM
Technology Solutions’ low noise GaAs pHEMT
technology in a lead-free 4 mm 24-lead package.
The amplifier requires a minimal number of off-chip
components resulting in a highly integrated low cost
solution.
Ordering Information ^1,2
Part Number
Package
MAAM-010333-TR1000
1000 Piece Reel
MAAM-010333-TR3000
3000 Piece Reel
MAAM-010333-001SMB
Sample Test Board
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose parts. Sample board is
supplied with mounted photodiode.
* Restrictions on Hazardous Substances,
European Union Directive 2002/95/EC.
1
Functional Schematic
24 23 22 21 20 19
N/C 1
18 _RFBA
RF_IN A 2
17 RFOUT A
N/C 3
N/C 4
VVA
16 I_ADJ2A
15 I_ADJ2B
RF_IN B 5
14 ^RFOUT ^B
N/C 6
13 RFBB
7 8 9 10 11 12
Pin Configuration ³
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Pin Name
N/C
RF_INA
N/C
N/C
RF_INB
N/C
I_ADJB
V_DD1B
TiltB
V_AGC
N/C
InterB
R_FBB
RF_OUT B
I_ADJ2B
I_ADJ2A
RF_OUT A
R_FBA
InterA
N/C
V_{DD_AGC}
TiltA
V_DD1A
I_ADJA
Paddle
Description
No Connection
RF Input A
No Connection
No Connection
RF Input B
No Connection
Current Adjust
+ 5V Bias Voltage
Tilt Connection
AGC Control Voltage: 0V to 3V
No Connection
Interstage Pin
Feedback Resistor
RF Output B
Current Adjust
Current Adjust
RF Output A
Feedback Resistor
Interstage Pin
No Connection
+ 5V AGC Bias Voltage
Tilt Connection
+ 5V Bias Voltage
Current Adjust
RF & DC Ground
3. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]