MA4FCP305 Datasheet, PDF (1/3 Pages) Tyco Electronics – Silicon Flip Chip PIN Diode

MA4FCP305
Flip Chip PIN Diode
RoHS Compliant
Features
• Low Series Resistance : 1.7Ω
• Low Capacitance : 50fF
• Fast Switching Speed : 20nS
• Silicon Nitride Passivation
• Polyimide Scratch Protection
• Designed for Automated Pick and Place Insertion
• Rugged by Design
Description
M/A-COM’s MA4FCP Series consists of Silicon Flip
Chip PIN diodes fabricated with M/A-COM’s
patented HMIC process. This diode is fabricated on
epitaxial wafers using a process designed for
repeatable electrical characteristics and extremely
low parasitics. This diode is fully passivated with
Silicon Nitride and has an additional layer of
Polyimide for scratch protection. These protective
coatings prevent damage to the junction during
automated or manual handling. This flip chip
configuration is suitable for pick and place insertion.
1269 Outline
Rev. V4
Applications
The small 0315 outline and low 0.085 pS RC
product, make the device useful for multi-throw
switch and switched phase shifter circuits requiring
<20nS switching speeds up to 18GHz operating
frequency.
Absolute Maximum Ratings
@ TA = +25°C (unless otherwise specified)
Parameter
Forward Current
Absolute Maximum
100 mA
Dim.
Inches
Min. Max.
Millimeters
Min. Max.
Reverse Voltage
- 40 V
Operating Temperature - 55°C to + 150°C
Storage Temperature
- 55°C to + 150°C
Dissipated Power
230 mW
Mounting Temperature +300°C for 10 seconds
A 0.0269 0.0289 0.683 0.733
B 0.0135 0.0155 0.343 0.393
C 0.0040 0.0080 0.102 0.203
D 0.0041 0.0061 0.105 0.155
E 0.0124 0.0144 0.315 0.365
F 0.0069 0.0089 0.175 0.225
1. Exceeding these limits may cause permanent damage.
1. Backside metal: 0.1 μM thick.
2. Yellow hatched areas indicate backside ohmic gold
contacts.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.