MA4EXP950H1-1277T_V3 Datasheet, PDF (1/4 Pages) M/A-COM Technology Solutions, Inc. – Silicon Double Balanced HMIC Mixer

MA4EXP950H1-1277T
Silicon Double Balanced HMIC Mixer
850 - 1050 MHz
Features
• + 35 dBm Typical Input IP3
• 8. 3 dB Typical Conversion Loss
• + 15 to + 19 dBm LO Drive
• Fully Balanced Passive Mixer
• NO External Matching Required
• Low Cost Miniature Plastic MLP Package
• RoHS* Compliant with 260 °C. Reflow Capability
• 100% MATTE Tin Plating
Description and Applications
M/A-COM's MA4EXP950H1-1277T is a silicon
monolithic 850-1050 MHz, high barrier, double
balanced mixer in a low cost, miniature surface
mount FQFP-N 3mm Square, 16 lead plastic
package. The die uses M/A-COM’s unique HMIC
silicon/glass process to realize low loss passive
elements while retaining the advantages of high
barrier silicon schottky barrier diodes to produce a
compact device.
These mixers are well suited for GSM and CDMA
cellular basestation infrastructure applications where
small size and high performance is required.
Typical applications include frequency conversion,
modulation, and demodulation in wireless receivers
and transmitters.
Absolute Maximum Ratings ^1,2
Parameter
Maximum Ratings
Operating Temperature
-40 °C to +85 °C
Storage Temperature
-65 °C to +150 °C
Incident LO Power
+20 dBm C.W.
Incident RF Power
+20 dBm C.W.
Soldering Temperature
+260 °C
1. Exceeding these limits may cause permanent damage.
2. Please refer to application note M538 for surface mounting
instructions.
MLP 3mm Package
(Circuit Side View)
M/A-COM Products
Rev. V3
PIN 1
PIN 16
PIN Configuration
PIN
Function
PIN
Function
1
N/C
9
N/C
2
N/C
10
RF
3
LO
11
N/C
4
N/C
12
N/C
5
N/C
13
N/C
6
N/C
14
IF
7
N/C
15
N/C
8
N/C
16
N/C
Ordering Information
Part Number
MA4EXP950H1-1277T
MAMX-090950-000SMB
Package
Tape and Reel
Sample Test Boards
Mixer Schematic
IF
RF
LO
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for
• North America Tel: [phone] • Europe Tel: [phone]
development. Performance is based on target specifications, simulated results, and/or prototype
measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under develop-
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has
been fixed. Engineering samples and/or test data may be available. Commitment to produce in
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
volume is not guaranteed.
changes to the product(s) or information contained herein without notice.