MA4EX950H1-1225T_V3 Datasheet, PDF (1/3 Pages) M/A-COM Technology Solutions, Inc. – Silicon Double Balanced HMIC Mixer

MA4EX950H1-1225T
Silicon Double Balanced HMIC Mixer
700 - 1200 MHz
Features
• 7.0 dB Typical Conversion Loss
• +13 to +17 dBm LO Drive
• HMIC IC Process
• Silicon High Barrier Schottky Barrier Diodes
• DC - 400 MHz IF Bandwidth
• Low Cost Miniature Plastic Package
• RoHS* Compliant with 260°C Reflow Capability
• 100% Matte Tin Plating
Description
M/A-COM’s MA4EX950H1-1225T is a silicon
monolithic 700 - 1200 MHz, high barrier, double
balanced mixer in a low cost miniature surface
mount SOT25 package. The die uses M/A-COM’s
unique HMIC silicon/glass process to realize low
loss passive elements while retaining the advan-
tages of high barrier silicon Schottky barrier diodes.
Applications
These mixers are well suited for high volume wire-
less and cellular applications where small size and
repeatability are required. Typical Applications in-
clude frequency conversion, modulation, and de-
modulation in wireless receivers and transmitters.
Electrical Specifications @ 25°C
Package Outline
M/A-COM Products
Rev. V3
PIN Configuration
PIN
Function
PIN
Function
1
RF
4
Gnd
2
Gnd
5
IF
3
LO
Ordering Information
Model No.
MA4EX950H1-1225T
Package
Tape and Reel
MAMX-000950-000SMB
Sample Test Board
Parameter
Frequency Range
Test Conditions
Units
Min.
Typ.
Max.
Conversion Loss
800 MHz
0.7 - 1.2 GHz
LO Drive = +15 dBm
dB
—
6.6
7.5
RF = -10 dBm, IF = 60 MHz
dB
—
8.1
10.5
L - R Isolation
800 MHz
0.7 - 1.2 GHz
LO Drive = +15 dBm
RF Level = -10 dBm
dB
—
27.5
—
dB
—
23.0
—
L - I Isolation
800 MHz
0.7 - 1.2 GHz
LO Drive = +15 dBm
RF Level = -10 dBm
dB
—
28.5
—
dB
—
28.5
—
R - I Isolation
800 MHz
0.7 - 1.2 GHz
LO Drive = +15 dBm
RF Level = -10 dBm
dB
—
25.0
—
dB
—
22.5
—
RF VSWR
800 MHz
0.7 - 1.2 GHz
LO Drive = +15 dBm
RF Level = -10 dBm
Ratio
Ratio
—
1.20:1
—
—
1.50:1
—
IF VSWR
DC - 400 MHz
LO Drive = +15 dBm
RF Level = -10 dBm
Ratio
—
1.55:1
—
Input IP3
850 MHz
0.7 - 1.2 GHz
LO Drive = +15 dBm
RF = -5 dBm, IF = 60 MHz
dBm
21.0
23.8
—
dBm
20.0
25.0
—
Input 1 dB Compression
850 MHz
0.7 - 1.2 GHz
LO Drive = +15 dBm
dBm
—
8.3
—
RF = -5 dBm, IF = 60 MHz
dBm
—
9.1
—
IF 1 dB Bandwidth
DC - 400 MHz
LO = 850 MHz @ +15 dBm
MHz
0
—
400
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for
• North America Tel: [phone] • Europe Tel: [phone]
development. Performance is based on target specifications, simulated results, and/or prototype
measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under develop-
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has
been fixed. Engineering samples and/or test data may be available. Commitment to produce in
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
volume is not guaranteed.
changes to the product(s) or information contained herein without notice.